View Full Version : Fire Extinguisher questions
moosetestbestanden
June 18th, 2004, 08:34 AM
Looking for anyone's experience w/ which f.e. to use, what type of mount is superior etc. Do tell.
Thanks!
slomove
June 18th, 2004, 11:44 AM
I have a standard red auto extinguisher for $ 20 or so that is bolted to the floor sheet in front of the passenger seat. Barely visible and does not bother the passenger. I noticed it must be one with a short stubby bottle. The long slim marine versions don't fit.
I am using the cradle that came with it. It holds the neck of the bottle. However, instead of the crappy plastic holding strip I slipped a double sided heavy duty Velcro tape between the back of the cradle and the floor that holds the bottle securely in place with 5" overlap.
Seems to work fine so far.
Gert
Roll a 7
June 18th, 2004, 04:16 PM
Mine is just like Dr. Gert's, except I'm using the chear plastic strap. Haven't had occasion to use it, but it appears that you just tear it open, grab the extinguisher and start extinguishing :!: A low tech and inexpensive solution. 8)
magnusfeuer
June 19th, 2004, 07:33 AM
I have a Sparco unit clamped to the right side of my roll bar where I can reach it without having to unplug from my harness.
A tech inspector told me that the mounting should be all-metal, which is quite understandable in a crash.
/Magnus F.
Michael Murphy
June 22nd, 2004, 11:29 AM
Mine is the same as Gert's. I bought the extinguisher and a metal bracket from Home Depot - all up capital outlay of about $20. Bolted to floor in front of passenger seat works very well and seems to satisfy the tech inspectors.
Powered by vBulletin® Version 4.1.10 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.