Results 1 to 4 of 4

Thread: Speedo angle drive replacement

  1. #1
    Join Date
    Aug 2010
    Posts
    85

    Default Speedo angle drive replacement

    Had to replace the speedo cable. In order to gain access I had to remove the angle drive from the gear box. Came off with a tug, but predictably replacing it is another matter altogether! Not enough room between box and tunnel wall to get a straight enough shot to insert the quill of the angle drive into the box. Looks like I may have luck if I can remove the circlip holding the connector to the gearbox first. Will try that tomorrow once I purchase a circlip removing tool. Accessibility may still be an issue though.

    Failing that my 2 options appear to be lowering the gearbox or cutting a hole in the transmission tunnel and accessing from the cockpit and either screwing a plate over the hole or using a grommet thingy.

    Anyone run into this problem?

    Nigel

  2. #2
    Join Date
    Sep 2003
    Location
    Newbury Park, CA
    Posts
    2,208

    Default

    On mine the angle drive is threaded onto a brass piece that is held in by the circlip.

    I also seem to recall my car already had a hole/grommet for access but will have to look to be certain. It might be on the reverse lamp switch I'm thinking of.

    I have a spare brass gearbox to angle drive fitting if you bunged yours up. It easy to do which is why I have the spare.

    I have successfully removed the circlip and angle drive with the the transmission in place so you should be able to do it.

    Doug

  3. #3
    Join Date
    Dec 2013
    Posts
    6

    Default

    Doug

    Under parts wanted I posted a request for a right angle speedometer drive which I broke. It is for a Cortina engined, T-9 Ford 5 speed trans driving a VDO Speedometer.
    If you have that drive and are willing to part with it, much obliged. Let me know if you have and how much

  4. #4
    Join Date
    Sep 2003
    Location
    Newbury Park, CA
    Posts
    2,208

    Default

    The spare bit I have is not the angle drive but the brass adapter, at least that's what I think I have.

    Is your's a cable drive speedometer or electronic?

    You may be able to get them from Caterham too.

    Send me a photo doug at tidsales dot com

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Speedo/Odo out - any tricks?
    By V-Robb in forum Questions and Answers
    Replies: 6
    Last Post: August 7th, 2010, 01:27 PM
  2. windscreen angle/areo
    By perry in forum Idle talk
    Replies: 22
    Last Post: November 16th, 2009, 02:09 PM
  3. Replacement radiator.
    By magnusfeuer in forum Questions and Answers
    Replies: 23
    Last Post: March 3rd, 2009, 09:58 PM
  4. battery replacement
    By Elv15 in forum Questions and Answers
    Replies: 12
    Last Post: February 28th, 2009, 02:42 PM
  5. Replacement headlight bulbs
    By athens7 in forum Questions and Answers
    Replies: 5
    Last Post: August 20th, 2008, 11:30 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •